ABB VSN900, Руководство по вводу в эксплуатацию

Страница: 31 / 36

Asset registration
Asset registration assigns the MAC address of gateway to a specific plant in Aurora Vision
®
.
The registration can be performed before or after the on-site installation is complete. When
you register the gateway, all the assets (inverters and other devices) connected to the
gateway are registered.
For more information, see Aurora Vision
®
documentation.
Verifying end-to-end data transfer
Make sure that data is reported and visible on the Aurora Vision
®
portal. After you have
completed the gateway setup, wait for 15 minutes and log on to www.auroravision.net using
a web browser on an Internet connected device.
1. In the Aurora Vision
®
portal, go to the Plants > Dashboard page of the plant.
2. Open the Device Status panel.
3. Verify that the energy readings and the status data agree with the actual inverter data.
4. Check that all the monitored devices are communicating as indicated at the last reported
time.
Start-up 31
12