24
5.5.3.
Standard fittings for withdrawable circuit-breakers for UniGear ZS1 switchgear
The basic versions of the withdrawable circuit-breakers are three-pole and fitted with:
– EL type manual operating mechanism
– mechanical signalling device for closing spring charged/discharged
– mechanical signalling device for circuit-breaker open/closed
– closing pushbutton
– opening pushbutton
– operation counter
– set of ten auxiliary circuit-breaker open/closed contacts
Note:
with the set of ten auxiliary contacts supplied as standard and the maximum number
of electrical applications possible, three make contacts (signalling circuit-breaker open) and
four break contacts (signalling circuit-breaker closed) are available.
– lever for manually charging the closing spring
– isolating contacts
– cord with connector (plug only) for auxiliary circuits, with striker pin which does not allow
connection of the plug in the socket if the rated current of the circuit-breaker is different from
the rated current of the panel
– racking-in/out lever (the quantity must be defined according to the number of pieces of
apparatus ordered)
– locking electromagnet in the truck. This prevents the circuit-breaker from being racked into
the panel with auxiliary circuits not connected (plug not inserted in the socket).
Ur
Isc
Rated uninterrupted current (40°C) [A]
Circuit-breaker type
kV
kA
W=800
W=1000
W=1000
P=210
P=275
P=275
u/l=310
u/l=310
u/l=310
ø=79
ø=79
ø=109
16
630
VD4/P 24.06.16 p210
20
630
VD4/P 24.06.20 p210
25
630
VD4/P 24.06.25 p210
16
1250
VD4/P 24.12.16 p210
20
1250
VD4/P 24.12.20 p210
25
1250
VD4/P 24.12.25 p210
16
630
VD4/P 24.06.16 p275
20
630
VD4/P 24.06.20 p275
25
630
VD4/P 24.06.25 p275
16
1250
VD4/P 24.12.16 p275
20
1250
VD4/P 24.12.20 p275
25
1250
VD4/P 24.12.25 p275
16
1600
VD4/P 24.16.16 p275
20
1600
VD4/P 24.16.20 p275
25
1600
VD4/P 24.16.25 p275
16
2000
VD4/P 24.20.16 p275
20
2000
VD4/P 24.20.20 p275
25
2000
VD4/P 24.20.25 p275
16
2300
VD4/P 24.25.16 p275
20
2300
VD4/P 24.25.20 p275
25
2300
VD4/P 24.25.25 p275
24
Notes
W = Width of the switchgear.
P
= Pole horizontal centre distance.
u/l = Distance between bottom and top terminal.
ø
= Diameter of the isolating contact.