ABB TSC 2013, Руководство по сборке, Страница: 47 / 88

Maintenance
Torch cleaner TC 2013 3HDA000057A8519-001 2-27
Assembly instructions
2.7 Maintenance
The TC 2013 torch cleaning station is largely maintenance-free due to the use of high-quality com-
ponents. The frequency of individual checks and maintenance work is guided by the particular
conditions of use of the TC 2013.
We recommend the following maintenance plan to guarantee perfect functioning of the TC 2013.
I
*) Mineral oil in accordance with DIN 51524-HLP 32, viscosity 32 cST at 40°C
**) Use only AS 72-K genuine spatter release agent!
WARNING
Before servicing and maintenance work the TC 2013 is
to be made pressure-less and disconnected from the
power supply and protected against being switched
back on.
Interval Machine part Activity Remark
daily TSC 2013 Visual inspection
weekly Spray nozzle - Test,
- Clean when required
Milling cutter unit - Test,
- Clean when required Do not use compressed
air
Maintenance unit
pressure regulator
Check pressure
Values see Chapter 2.2
Technical data of TC 2013
Maintenance unit
oiler
Check fill-up quantity
Mineral oil to DIN 51524-
HLP 32
Release agent container - Check fill-up quantity
- Visual inspection on
damage
- Exchange when required ABB ordering No
0.743.505.003 **
Cutting knife - Clean with brush and
grease lightly
- Check on wear Grease
Milling cutter Check on wear, damage
and firm seating
Wire collecting container Regularly empty
monthly Emergency stopping
devices Test emergency stopping
devices for function.
Maintenance unit
air filter
Check on pollution
Cable and connector Check for damage and
buckling.
V-block TC 2013 Check on wear
2 annual Release agent container Exchange of the container ABB ordering No
0.743.505.003 **