ABB Terra Gateway Pro, Руководство по установке

Страница: 15 / 31

INSTALLATION MANUAL
STATUS
Released
SECURITY LEVEL
Public
REV.
001
LANG.
en
PAGE
15/31
© Copyright 2022 ABB. All rights reserved.
5 Power button Power button
6 Power, CFast, Link, Run LED status indicators
(refer to table Led status for
details)
7 ETH2 Ethernet 2 interface
8 CFast CFast slot
9 Reset button Reset button
10 ETH1 Ethernet 1 interface
11 Off/On Termination resistor
12 L1, L2, L3 LED status indicators
13 IF option ETH3 & ETH4 – not used
14 Monitor/Panel interface (configuration-
dependent) Montior/Panel interface
15 Screw point for cable shield
16 Battery compartment on the underside Battery compartment
3.3.1 Led status (Power, CFast, Link, Run)
LED Color Status Explaination
Power
Green On Power supply ok
Red
On The system is in power saving (standby) mode.
Blinking The MTCX is running; the battery state is "BAD".
The system is in power saving (standby)
Red-Green Blinking Faulty or incomplete BIOS
CFast Yellow On Indicates CFast access
Link Yellow
On Indicates an active SDL connection on the panel
connector
Blinking An active SDL connection was interrupted due to
power loss of the panel
Run Green Blinking Operating system is starting up.
On Application running
Red On Application in service mode
Orange Blinking License violation has occurred.
3.4 Network overview
The table below lists the open ports that can be accessed via Terra Gateway Pro ethernet port.
Ports Description Function
22/tcp SSH Service and maintenance
5353/udp mDNS