
4
—
About this document
Function of this document
The document is only applicable for this EVSE (Terra AC),
including the variants and options listed in chapter
The EVSE from here on in the document is
referred to as the EVSE. The document gives the information
that is necessary to do these tasks:
• Installation
• Commissioning
Target group
The document is intended for qualified installation
engineers. For a description of the required qualifications,
refer to section
Required qualifications for the installation
Note:
It is possible that not all symbols or signal
words are present in this document.
Signal
word
Description
Symbol
Danger
If you do not obey the instruction, this
can cause injury or death
Refer to
Warning
If you do not obey the instruction, this
can cause injury
Refer to
Caution
If you do not obey the instruction,
this can cause damage to the EVSE
or to property
Note
A note gives more data, to make it easier
to do the steps, for example
-
Information about the condition of the
EVSE before you start the procedure
-
Requirements for personnel
for a procedure
-
General safety instructions
for a procedure
-
Information about spare parts that are
necessary for a procedure
-
Information about support equipment
that is necessary for a procedure
-
Information about supplies
(consumables) that are necessary for a
procedure
-
Make sure that the power supply to the
EVSE is disconnected
-
Electrotechnical expertise is required,
according to the local rules
-
Alternating current supply
—
Table 1: General symbols and signal words
How to use this document
1. Make sure that you know the structure and contents of
this document.
2. Read the safety chapter and make sure that you know all
the instructions.
3. Do the steps in the procedures fully and in the correct
sequence.
4. Keep the document in a safe location that you can easily
access. This document is a part of the EVSE.