ABB Terra 124 Скачать руководство пользователя страница 27

Страница: 27 / 54

5.3.3

Prepare a custom foundation

Preliminary requirements

•

Custom foundation. Refer to section

8.10.5

Procedure

1. Make the custom foundation.

2. Route the cables through the opening in the foundation. Apply the full cable

slack.

5.4

Unpacking

5.4.1

Unpacking procedure

1. Do a check on the transport sensors. Refer to section

5.4.2

2. Remove the packaging material.

3. Discard the packaging material. Refer to section

3.9

4. Do a visual check for damage on the outside and inside of the EVSE.

5. Make sure that all parts are delivered according to the order. Refer to the order

and section

8.2

6. If you find damage or the parts are not according to the order, contact the local

representative of the manufacturer.

7. Remove the border covers. Refer to section

6.3

8. Remove the cabinet from the pallet. Refer to section

5.4.3

5.4.2

Do a check on the transport sensors

1. Do a check on the sensors (A) that

record the shocks during transport.

2. Do a check on the sensors (B) that

record the maximum tilt during

transport.

3. If the sensors (A) show a red

indication or the sensors (B) show a

tilt that is too high, do these steps:
For the transport specifications, refer

to section

8.9

a. Refuse the delivery of the EVSE.
b. Make a note on the delivery

receipt.

c. Within three days of the delivery,

ask the transport company for an inspection.

d. If you see damage on the cabinet, through the packaging material, do not

unpack the EVSE.

e. Contact the manufacturer and give details of the delivery problems. Refer to

section

1.12

TiltWatch PLUS

ShockWatch

Installation

BCM.S1102.0-EN | 001

Содержание Terra 124






















































Результаты поиска

Содержание Terra 124

Отзывы:

Бренды по названию

Популярные бренды

ABB Terra 124, Руководство по установке

Результаты поиска

Содержание Terra 124

Отзывы:

Бренды по названию

Популярные бренды