23
Code Event
Number
Default value
representing
of the factor
the event
E25
Output signal TS1 activated
1
0
E26
Output signal TS1 reset
2
0
E27
Output signal SS1 activated
4
0
E28
Output signal SS1 reset
8
0
E29
Output signal SS2 activated
16
0
E30
Output signal SS2 reset
32
0
E31
Output signal SS3 activated
64
0
E32
Output signal SS3 reset
128
0
E33
Output signal TS2 activated
256
256
E34
Output signal TS2 reset
512
512
Default checksum for mask V158
768
E50
Restarting
*
-
E51
Overflow of event register
*
-
E52
Temporary interruption in data communication
*
-
E53
No response from the module over the data communication
*
-
E54
The module responds again over the data communication
*
-
0
Not included in the event reporting
1
included in the event reporting
*
No code number
-
Cannot be programmed
Note!
The eventcodes E52...E54 are only generated
by the datacommunicator unit. (SACO 100M,
SRIO 1000M etc.)
Data to be
transferred
over the bus
In addition to the event data transfer the SPA-
bus allows reading of all input data (I-data) of
the module, setting values (S-data), information
recorded in the memory (V-data), and some
other data. Further, part of the data can be al-
tered by commands given over the SPA-bus. All
the data are available in channel 0.
Data
Code
Data flow Value range
direction
INPUTS
Filtered current measured on phase L1
I1
R
0...8.5 x I
n
Filtered current measured on phase L2
I2
R
0...8.5 x I
n
Filtered current measured on phase L3
I3
R
0...8.5 x I
n
Compensated unbalance current
∆
I
c
I4
R
0...232% x
∆
I
n
999 = Unbalance prot.
inhibited
Measured unbalance current
∆
I
I5
R
0...212% x
∆
I
n
Blocking or control signal BS1
I6
R
0 = no blocking
1 = BS1-signal active
Blocking or control signal BS2
I7
R
0 = no blocking
1 = BS2-signal active
Blocking or control signal RRES
I8
R
0 = no blocking
1 = RRES-signal active
