ABB SmartRack MV, Руководство пользователя, Страница: 8 / 24

8
S M A RTR ACK ™ M V
R EM OT E R AC K I N G D E V I C E
The Control Box incorporates two plastic handles
for lifting and for use while operating the device.
The control housing should never be picked up or
held by the cord.
The Motor Box has three plastic handles that are
located on either side and one in the rear to assist
the operator in the installation and removal of the
motor box to the mounting adapter plate. The
Motor Box should never be lifted by the protruding
hex socket or by the cord.
Storing the device
SmartRack™ MV must be stored indoors in a cool,
dry, dust-free place away from sunlight. During
periods of non-use SmartRack™ MV should be
covered to protect from accumulation of dust and
keep sunlight off the controller screen. The device
should be stored in an environment that meets the
temperature and humidity specifications shown in
Section Environmental Specifications.
SmartRack™ MV cart is intended to store and
transport all the components of the device. It is
good practice to always return the power, control,
and motor cables to their respective sections of
the cart, replace the Control Box to its spot, and
latch the Motor Box to the provided bracket.
—
05
Cart handle
—
06
Control box handles
—
07
Motor box handles
—
08
Properly stored
SmartRack™ MV
—
05
—
07
—
08
—
06