6
EMC Contacts
Position top cover as shown
Slide forward
Lower rear
Refit pozidriv screws
(one each side)
Refit PCB locking bar
ensuring the slots
in the bar locate correctly
on the boards and chassis
1
2
3
4
5
5
Caution. When positioning the
chassis top cover, take care not to
damage the EMC contacts.
Fig. 3.7 Refitting the PCB Locking Bar and Chassis Top Cover
…3
Fitting Media Board
Sub-Assembly – Figs. 3.1 to 3.7
11) Fit the new media board sub-assembly – see Fig. 3.5.
12) Refit the PCB locking bar and chassis top cover –
see Fig. 3.7.
13) Refit the instrument to the case – see Fig. 3.1.
14) Restore the power supply to the instrument.
