ABB S800 I/O, Руководство пользователя

Страница: 91 / 150

*HQHUDO,QIRUPDWLRQDQG,QVWDOODWLRQ8VHU¶V*XLGH
6HFWLRQ 'HVLJQ&RQVLGHUDWLRQV
3BSE 020 923R101 81
In a “duplex connection” a cable break or loss of a TB820 will only affect the
clusters down-stream of the break. In a “simplex connection” a cable break or loss
of a TB820 will affect all I/O expansion clusters on the ModuleBus.
3RZHU6XSSO\&RQQHFWLRQV
The TB820 requires 24V d.c. (19.2 - 30V) with a maximum current requirement of
1,4 Ampere. The TB820 can be powered by either a single or redundant power
supply. If a redundant power supply is used, the TB820 can monitor the status of
each supply and send the status back to the FCI of the I/O Station. See
Figure 3-9
for power supply connections.
The incoming power can then be distributed to other TB820s or the I/O modules if
desired. Refer to
Figure 3-11 and Figure 3-12 for power supply connection
diagrams.
)LJXUH 7%3RZHU6XSSO\&RQQHFWLRQV
If the distributed power needs to be independent of whether the power plugs are
removed or not, then the L+ and L- terminals should be bridged
SB
SA
L-
L+ L+
L-
TB820
Terminal
Headers
1
2
3
1
2
3
+24V d.c.
0V d.c.
From Power Supply
Power Supply “B”
Monitor
Power Supply “A”
Monitor
+24V d.c.
0V d.c.
To MTUs
(I/O Modules)
X1B
X1A
Jumper
X4 X5
Rx
Tx
Rx
Tx