It is also possible to insert an IED from the template library to create a new IED in the
plant structure. After a template IED has been imported, the
IP address
, the
Caption
in IED's
Object Properties
and the
Technical Key
that corresponds to the physical
IED have to be changed.
A template IED can be inserted only when the bay is selected in the
plant structure.
1.
In the
Plant structure
view, select the bay, right-click, point to
New
and select
Create from template
.
The
Create New Object from Template
dialog box opens.
GUID-A5D22ADA-02A5-43F8-BA02-52A4A915D7EA V2 EN
Figure 29:
PCM600: Selecting an IED from the template library
2.
Select the IED from the list of available IEDs.
3.
Click the icon on the right column in the list of available templates.
The
Template Properties
dialog box opens.
Section 4
1MRS757810 C
Setting up a project
52
REC615 and RER615
Engineering Manual