Section 5
Connecting
5.1
Required tools
When handling CT/VT terminals in slots C1 and D2 respectively, use a flat-blade
screwdriver.
Table 3:
Required tools
Terminal
Slotted screw (part of
the connector)
Screwdriver blade
Width
Thickness
CT (C1)
M3
∅3.5 mm (0.1377 in)
Max. ∅0.6 mm
(0.02362 in)
VT (D2)
M2.5
∅3.0 mm (0.1181 in)
Max. ∅0.5 mm
(0.01968 in)
5.2
Connecting wires
All connections are made on the rear of the case. No soldering is needed.
•
Open the screw-compression type terminals before inserting any wires. By
default the terminals are closed at the time of delivery.
•
Use fine wire in door mounting.
2NGA000821 A
Section 5
Connecting
REX610
33
Installation Manual
