manualshive.com logo in svg

ABB Relion RES670, Руководство оператора

Поделиться
Скачать
ABB Relion RES670 Скачать руководство пользователя страница 53

Displays available settable parameters. The operation mode, the operate voltage as
percentage of 

Ubase

 are examples of the settings available here.

9.3.4 

Frequency protection

9.3.4.1 

Overview

For Frequency protection there are settings for Underfrequency, Overfrequency
and Rate of change of frequency. Each category has some instances of parameters.
All functions can be set On or Off and have a number of other settable parameters
such as rated voltage and time delay before tripping.

9.3.4.2 

Overfrequency protection SAPTOF

Main menu/Settings/Setting Group/Frequency protection/
OverFrequency(PTOF,81)/SAPTOF:x

Displays available instances of SAPTOF with a number of settings per instance.
The settings are operation, start frequency, base voltage setting, internal blocking
level, operate time delay and reset time delay. For the Overfrequency function to
operate correctly the 

Operation

 setting must be 

On

.

9.3.4.3 

Rate-of-change frequency protection SAPFRC

Main menu/Settings/Setting Group N/Frequency protection/
RateOfChangeOfFrequency(PFRC,81)/SAPFRC:x

Displays available instances of SAPFRC with some settings per instance. The
settings include parameters such as operation, base voltage setting, start frequency,
internal blocking level, time delay to trip and frequency restoration.

9.3.4.4 

Underfrequency protection SAPTUF

Main menu/Settings/Setting Group N/Frequency protection/
Underfrequency(PTUF,81)/SAPTUF:x

Displays available instances of SAPTUF with a number of settings per instance.
These include parameters like operation, base voltage, and start frequency. To
ensure the proper operation of the Underfrequency function the 

Operation

 setting

must be 

On

.

9.3.5 

Multipurpose protection

9.3.5.1 

Overview

Under Multipurpose protection there are several instances of General current and
voltage parameters. This function has current and voltage inputs. The parameters

1MRK511251-UEN B

Section 9

Read and change settings

47

Operator's manual

Содержание Relion RES670































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды