ABB RELION REB670, Руководство оператора

Страница: 89 / 116

Available GOOSE binary signals can be viewed here. There are a number of signal
indications per set.
MultiCommand send
Main menu/Test/Function status/Communication/Station communication/
MultipleCommandSend/MULTICMDSND:x
The MultiCommand Send indication is used to display data from the Local Optical
network (LON).
MultiCommand receive
Main menu/Test/Function status/Communication/Station communication/
MultipleCommandReceive/MULTICMDRCV:x
The MultiCommand Receive indications displayed here show available sets of
output data. Each set of output data has a number of signals. Other information
displayed here shows whether there has been a change in data and whether data is
valid.
Horizontal communication via GOOSE for interlocking IntlReceive
Main menu/Test/Function status/Communication/Station communication/
ReceivingInterlInfo/GOOSEINTLKRCV:x
The Receiving Interlock information available here indicates the state of various
apparatus such as whether they are in a closed or open position and if their status is
valid. Several apparatuses can be displayed. There are also indications of
reservation requests, reservation granted and the validity of data and communication.
11.6.11 Setting groups
Main menu/Test/Function status/Setting groups
Displays available setting groups and indicates which of them is in use.
11.6.12 Test
Main menu/Test/Function status/Test
Displays the parameters ACTIVE, OUTPUT and SETTING. The ACTIVE
parameter indicates whether the IED is in test mode or not, the OUPUT parameter
indicates whether test mode has been activated by a binary input and the SETTING
parameter indicates whether or not test mode has been activated by a setting. The
output data is binary (0 or 1).
11.6.13 Authorization
Main menu/Test/Function status/Authorization
1MRK505209-UEN E
Section 11
Test the IED
83
Operator's manual