background image

01023577 Rev B     Page 1

Bio-Medical Devices Intl  

 17171 Daimler Street    Irvine, CA 92614    800-443-3842    www.maxair-systems.com

Intended Use

The MAXAIR

®

 CAPR

®

 Shroud Systems are intended to filter 

 

aerosolized and droplet particulates.

 

Shrouds are designed for single use applications.

For Use With

The MAXAIR 2260-05 DLC-Shroud is a component of the 

MAXAIR CAPR Shroud Systems and is intended to be donned with a 

MAXAIR CAPR Powered Air Purifying Respirator (PAPR) 

Helmet and a Filter Cartridge.

O.N. 2260-05SM 

(Small-Medium)

O.N. 2260-05ML 

(Medium-Large)

              
                  

  WARNING

Use only if package is received unopened and contents are 

 

undamaged. If damage is noted, contact the shipper for replacement 

or repair.

 

Prior to using any MAXAIR

®

 System or component, be sure to be 

familiar with the system’s NIOSH approved configuration.

 

DO NOT use if any component is damaged.  If any components are 

damaged or contaminated and therefore unfit for safe and effective 

use, they should be replaced immediately. 

Only trained and experienced personnel who have read and under

-

stand the User’s Instructions should use this product.

 

Failure to follow the User’s Instructions Manual may be hazardous to 

the user’s health.

 

The institution using this product in any application is responsible for 

determining the appropriateness of this equipment relative to regula

-

tory requirements. Bio-Medical Devices Intl, Inc. does not recommend 

the appropriate systems for a particular institution or facility.

 

Use only MAXAIR Systems/ NIOSH approved compatible 

 

components.  

 

NOT for use in atmospheres immediately dangerous to life or health 

(IDLH), and atmospheres containing less than 19.5% oxygen, or 

more than 25% oxygen.

Flammability Level II: fabric may burn if exposed to open flame.

 

Follow current local regulations governing biohazard waste to safely 

dispose of used shrouds.

If you need more information, contact your BMDI Sales 

 

Representative, or call BMDI customer service at 1-800-443-3842.

 CAUTION: 

Before use, refer to the CAPR System User’s Instructions Manual received with each MAXAIR Helmet for 

details. Always start with a 2260-05ML unless the wearer has a very small head (Bottom, page 3.).

 

      

               

!

2260-05 DLC Shroud 

Instruction For Use

Symbol Definitions

                    

                  Warning, Caution, or Note

                  Order Number                                   Part Number

 

      

               

!

O.N.

PN

 

      

               

!

Standard CAPR System with 2260-05 DLC Shroud

1.  2081-03 Helmet 

 

(2081-03 Helmet, 2051-07 

SnapOn Cage removed, 2071-

06 Liner, 2590-05 Power Cord)

2. 2164-10 Filter Cartridge*
3. 2061-08 Filter Cover Cap 

4. 2500-36TSC Battery**

5. 2000-76 Battery Belt

6. 2600-01 Battery Charger

7. 2260-05 DLC Shroud

*Alternate Filter Cartridges include the 2166-10 and 2167-10.    

**Alternate Batteries include the 2500-37TSC.

Materials

DLC Lens is PETG 

DLC Cuff is Polyurethane

 

Shroud body is Polypropylene

 

Specifications

Temperature Limits: 49

0

Efficiency Rating: HE

Regulatory 

NIOSH   

1

5

6

3

2

7

4

Содержание 2260-05 DLC Shroud

Страница 1: ...ive to regula tory requirements Bio Medical Devices Intl Inc does not recommend the appropriate systems for a particular institution or facility Use only MAXAIR Systems NIOSH approved compatible components NOT for use in atmospheres immediately dangerous to life or health IDLH and atmospheres containing less than 19 5 oxygen or more than 25 oxygen Flammability Level II fabric may burn if exposed t...

Страница 2: ...ud over and down the back of the Helmet 8 Use Pull Tap to position Shroud Rear Snap over FCC Rear Snap snap and secure Disassembly Reverse Asssembly steps to remove Shroud from Helmet WARNING Dispose of contaminated Shrouds according to institutional protocol for contaminated waist 2 Grasp top of DLC Cuff and pull gently away from Lens so that Cuff and Flappers are away from Lens 6 Hold helmet sec...

Страница 3: ...tension 6 Position front headband within inch of eyebrows for visualization of the Safety LEDs WARNING After donning if conditions 1 and 2 both are not achieved switch to the other size DLC and repeat the Assembly and Donning steps to this point Condition 1 Ensure the DLC Flappers are away from the Lens positioned perpendicular to your temples and in front of the FCC Side Tabs v Condition 2 Ensure...

Страница 4: ...ng foward away from the body and discard 2 While pulling up the shroud from the bottom back roll the shroud inside over outside up and over the Helmet 1 Untie all ties 4 Remove other PPE per manufacturers recommendations 7 Lift Helmet up foreward and off the head 6 Loosen Ratchet Knob counterclockwise 8 Disconnect Power Cord from the Battery push Secure Connection Button down pull Cord Connector o...

Отзывы: