A051094
Fig. 5.1.-1
SLD design constraints
5.2.
Switchgear overview
The switchgear overview is generated automatically. No configuration to get
the page is necessary. To get the overview on the right shape, some rules have
to be respected:
*
The overview is oriented according to the IP addresses. The lower IP
address is left of the device you want to monitor and the higher IP address
is right to the station you want to monitor.
*
The size of the overview is the size of a subnet. In the subnets, click
Next
to continue or use the numbered navigation buttons
*
There are 3 SLDs displayed per page. You can continue and move back
with the
Next
button or use the numbered navigation buttons
*
When drawing SLD in the Configuration Tool, use the full width of the
drawing area in order to prevent a discontinued (only from visual point of
view) busbar in the overview. See Section 5.1. SLD design constraints .
20
REF 542plus
Multifunctional Protection and Switchbay
Control Unit
Installation Manual for Web Interface
Installation manual
1MRS755865
