manualshive.com logo in svg

ABB PSTX105, Руководство по установке и пусконаладке

Поделиться
Скачать
ABB PSTX105 Скачать руководство пользователя страница 58

6.4.3 

Event log

Path in menu:  
Menu

 

u 

Event log

For navigation,

 see Figure 65.

The Event log menu checks the event log in the 
softstarter. When entering this menu the 100 latest events 
in the log are listed, in chronological order with the latest 
event as No. 1, the second latest as No. 2 etc. 
The events are shown with “type of event” and date.  
For details about all events press details. 
Use navigation keys to view all entries in the event log. 
The types of event logs are:

•

Faults

•

Protections

•

Warnings

•

Parameter changed

•

Run

See Figure 64. 

Faults

 

Use the Navigation keys to select a Fault and press 
“Details” to read details about the Fault (Name, On time 
and Event count). Then press the i-key to see information 
about the Fault. Press 

 “Back” to return to Faults log 

menu.

Protections

 

Use the Navigation keys to select a Protection and 
press 

 “Details” to read details about the Protection 

(Name, On time and Event count). Press the i-key to see 
information about the Protection. Press 

 “Back” to 

return to Protections log menu.

Warnings

 

Use the Navigation keys to select a Warning and press 

 “Details” to read details about the Warning (Name, On 

time and Event count). Then press the i-key to see further 
information about the Warning. Press 

 “Back” to return 

to Warning log menu.

Parameter changed 

Use the Navigation keys to select a parameter and press 

 “Details” to read details about the parameter which 

has been changed (Name, On time and Event count). 
Press 

 “Back” to return to Warning log menu.

Run

 

Use the Navigation keys to select a run event and press 

 “Details” to read details about the run event (Name, 

On time and Event count). Press 

 “Back” to return to 

Warning log menu.

Figure 65: Event log navigation.

Event logs 

Faults 

Protections 

Warnings 

Parameter changed 

Run

MENU

Parameters

Assistants

Motor jog

Event log

Backup handling

System info

Settings

64

1SFC132081M0201

Figure 64: Event log.

Local

 PSTX

Event logs 

Faults

Protections
Warnings
Parameter changed
Run

Done

12:00

Select

6

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Содержание PSTX105



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды