20
A B B U PS PRODUC TS A N D SOLUTI ON S
5 .3 .1 UPS start-up
To start up the UPS with mains supply:
1. Check that all cables are securely and correctly connected.
2. Switch ON the AC input breaker. The UPS will enter into Standby Mode if the setting of Bypass mode
is disabled. Or the UPS will enter into Bypass Mode, if the setting of Bypass mode is enabled.
NOTE
WHEN UPS IS IN BYPASS MODE, THE OUTPUT VOLTAGE COMES DIRECTLY FROM UTILITY, SO THE LOAD IS
NOT PROTECTED BY UPS. TO PROTECT THE PRECIOUS LOAD, THE UPS SHOULD BE TURNED ON TO LINE
MODE.
3.
The LCD is on home page, press the “ON/ENTER” button, LCD will show a prompt page of “Turn On”;
Move the arrow to “Yes” by up or down button, then press “ON/ENTER”, the UPS will be starting up
with beeping once. You could also enter the “control menu” to select the instruction “Turn On” to
startup the UPS. Please refer to the section of “LCD operation”.
First
second
4.
About 27 seconds later, the UPS will enter into Line mode; “Line mode” will be displayed on LCD. (In line
mode, if the utility power is abnormal, the UPS will transfer to Battery mode without interruption.)
To start up the UPS without mains supply. (cold start):
1. Check that all cables are securely and correctly connected.
2. Switch ON the DC input breaker.
3. Press the battery Start Button to Start the internal power supply, and the UPS will enter standby
mode;
4. The LCD is on home page, press the “ON/ENTER” button, LCD will show a prompt page of “Turn
On”; Move the arrow to “Yes” by up or down button, then press “ON/ENTER”, the UPS will be
starting up with beeping once. You could also enter the “control menu” to select the instruction
“Turn On” to startup the UPS. Please refer to the section of “LCD operation”.
5.
About 27 seconds later, the UPS will enter into Battery mode; “Battery mode” will be displayed on
LCD (In Battery mode, it will shutdown automatically when battery is depleted. If the utility power
is restored, it will auto restart to Line mode.)
—
5 .3 UPS start-up and shutdown
Y
Yi
i__L
Li
iu
u
2
20
02
22
2-
-0
01
1-
-2
21
1
Bypass Mode M
IP1:122.6V/49.9Hz
IP2:122.6V/49.9Hz
OP1:120.5V/49.9Hz
OP2:120.5V/49.9Hz
Bat: 97.8V/97.0V
Load: 0/ 0/ ----%
Y
Yi
i_
_L
Li
iu
u
2
20
02
22
2-
-0
01
1-
-2
21
1
Standby Mode M
IP1:
0V/0HZ
IP2:
0V/0HZ
OP1: 0.0V/ 0.0Hz
OP2: 0.0V/ 0.0Hz
Bat: 97.8V/97.0V
Load: 0/ 0/ ----%
Y
Yi
i__L
Li
iu
u
2
20
02
22
2-
-0
01
1-
-2
21
1
Bypass Mode M
IP1:122.6V/49.9Hz
IP2:122.6V/49.9Hz
OP1:120.5V/49.9Hz
OP2:120.5V/49.9Hz
Bat: 97.8V/97.0V
Load: 0/ 0/ ----%
YYii__LLiiuu
220
02
22
2-
-0
01
1-
-2
21
1
Turn ON ?
:
Yes
No
Y
Yi
i_
_L
Li
iu
u
2
20
02
22
2-
-0
01
1-
-2
21
1
Turn ON ?
:
Yes
No
Y
Yi
i_
_L
Li
iuu
2
20
02
22
2-
-0
01
1-
-2
21
1
Control:
:
Turn on
Bat Test
Turn To Bps
SR Off
Charger Off
Y
Yi
i__L
Li
iu
u
2
20
02
22
2-
-0
01
1-
-2
21
1
Line Mode M
IP1:120.6V/49.9Hz
IP2:120.6V/49.9Hz
OP1:120.5V/49.9Hz
OP2:120.5V/49.9Hz
Bat: 97.8V/97.0V
Load: 0/ 0/ ----%
Y
Yi
i__L
Li
iu
u
2
20
02
22
2-
-0
01
1-
-2
21
1
Bat Mode M
IP1: 0.0V/ 0.0Hz
IP2: 0.0V/ 0.0Hz
OP1:120.5V/49.9Hz
OP2:120.5V/49.9Hz
Bat: 97.8V/97.0V
Load: 0/ 0/ ----%
Back Time: 13H
Y
Yi
i_
_L
Li
iuu
2
20
02
22
2-
-0
01
1-
-2
21
1
Turn ON ?
:
Yes
No
Y
Yi
i_
_L
Li
iu
u
2
20
02
22
2-
-0
01
1-
-2
21
1
Line Mode M
IP1:120.6V/49.9Hz
IP2:120.6V/49.9Hz
OP1:120.5V/49.9Hz
OP2:120.5V/49.9Hz
Bat: 97.8V/97.0V
Load: 0/ 0/ ----%
