Assembly Instructions / Power2 500-M
5 Installing the high-pressure stage / 5.2 Placing the high-pressure
stage on the bracket
© Copyright 2020 ABB. All rights reserved.
HZTL455311P0009_EN
Rev.A
July 2020
5.2
Placing the high-pressure stage on the bracket
Fig. 11: Preparing the fastening elements of the high-pressure stage
1. Insert expansion bush (42190) into bearing casing.
2. Screw the clamping nut (42201) flush onto the threaded rod (42191). The hexagon of the
thread screw is at the top.
3. Place thrust washer (01) of clamping nut onto expansion bush.
4. Lead threaded rod (42191) with screwed-on clamping nut through thrust washer, expan-
sion bush and bearing casing.
5. Screw the centering bush (42193) flush onto the threaded rod from below.
Page
20
/
29
Содержание Power2 Series
Страница 2: ......
