Page 4
© 2021 ABB. All rights reserved.
QUICK START GUIDE
Each Module has an LED for each circuit (1, 2, & 3), and one LED for the module itself.
•
Intermittent or latent failures will be indicated by the X indicator.
•
Some fault indications remain active after correction.
Reset the module by toggling the DC input circuit breaker for the unit.
•
OK LED indicates the highest LED priority. Priority 1 is highest.
•
Each Circuit LED indicates the Condition of its Circuit, independently of the other Circuits.
•
Will not occur if shelf ID is 0.
X
Condition
Action
Priority
1
LED
Circuit External Fault
See Circuit External Fault below.
Toggle DC Input breaker after action applied.
Circuit Shutdown
Clear external fault. Toggle DC Input breaker.
