Disposing of this product correctly will help save valuable resources and prevent any potential neg-
ative effects on human health and the environment, which could otherwise arise from inappropriate
waste handling.
1.2.3
Recycling the Transport Material
ABB designs all transport material to be recyclable where practical. The recycling of the transport
material depends on the material type and availability of local recycling programs.
After receiving the system into the site, the package and the transportation locking have to be
removed. Recycle the transport material according to local regulations.
1.2.4
Disposal of the Product
When the product is to be disposed, it should be dismantled and the components recycled
according to local regulations.
1.2.4.1
Dismantling and Recycling of the Product
Dismantle and recycle the components of the product according to local regulations.
CAUTION
Some of the components are heavy! The person who performs the dismantling of
the system must have the necessary knowledge and skills to handle heavy
components to avoid the risk of accidents and injury from occurring.
•
Load cell: These parts are made of structural steel, which can be recycled according to
local instructions. All the auxiliary equipment, such as cabling or hoses must be removed
before recycling the material.
1.3
Function and Design
1.3.1
General
A complete measuring system normally consists of two load cells, a junction box, one control unit
with two measurement channels and cabling.
Pressductor PillowBlock Load Cells, Vertical Measuring PFCL 201, User Manual
1 Introduction
6
3BSE023881R0101 en Rev H
Содержание PFCL 201
Страница 35: ......
