ABB LWT300 series, Руководство пользователя

Страница: 53 / 108

Configuring the instrument
49
Changing probe length
The probe length is already programmed into the instrument. Should you have to physically shorten the
probe for any reason, do not forget to change the probe length programmed in the instrument.
To do so:
1
Select
Device Setup
>
Application Setup
>
Probe Length
.
2 Press Edit .
3 Set the length of the shortened probe and press OK .
The probe length is measured as such:
—
Figure 37
Measuring the probe length
Selecting tank type
You can set the type of vessel in which the probe will be hanging. The type of vessel impacts the quality
and nature of the signal sent down the probe. The default tank type is
Metallic
.
To do so:
1
Select
Device Setup
>
Application Setup
>
Tank Type
.
2
Press
Edit
.
3
Select the type of tank in which the probe will be immersed and press
OK
.
Setting nozzle length
You can set the length of the nozzle present on your tank. For an illustration of the concept, see Figure
40 on page 53.
To do so:
1
Select
Device Setup
>
Application Setup
>
Nozzle Length
.
2
Press
Edit
.
3 Set the length of the nozzle present on your tank and press OK .