LMT10 0 A N D LMT 20 0 |
M AG N E TOS T R I C T I V E L E V EL T R A N SM I T T ER S | FF O I/L M T 10 0/ 2 0 0/FF - EN R E V. A
7
Use of instruction
DANGER - Serious damage to health / risk to life
This symbol in conjunction with the signal word “DANGER”
indicates an imminent electrical hazard Failure to observe
this safety information will result in death or severe injury
WARNING - Bodily injury
This symbol in conjunction with the signal word “WARNING”
indicates a potentially dangerous situation Failure to observe
this safety information may result in death or severe injury
CAUTION - Minor Injuries
This symbol in conjunction with the signal word “CAUTION”
indicates a potentially dangerous situation Failure to observe
this safety information may result in minor or moderate injury
This symbol may also be used for property damage warnings
NOTICE - Property Damage
This symbol indicates a potentially damaging situation
Failure to observe this safety information may result in
damage to or destruction of the product and / or other
system components
IMPORTANT (NOTE)
This symbol indicates operator tips, particularly useful
information or important information about the product or its
further uses The signal word “IMPORTANT (NOTE)” does not
indicate a dangerous or harmful situation
Operator liability
In instances where corrosive and / or abrasive materials are
being measured, the user must check the level of resistance of
all parts that are coming into contact with these materials ABB
offers guidance in the selection of material but does not accept
liability in performing this service The user must strictly
observe the applicable national regulations with regards to
installing, functional testing, repairing and maintaining
electrical devices
Qualified personnel
Installing, commissioning and maintaining the device may be
performed only by trained personnel who are authorized by the
plant operator These trained personnel must have read and
understood this manual and must comply with its instructions
RoHS Directive
This device and all of its subcomponents have been tested and
found to be compliant with Directive 2011/65/EU (RoHS 2)
Returning devices
For the purpose of returning the device for repair or
recalibration, use the original packaging or other suitably
secure shipping method The sender should contact the factory
for return authorization number and fill out return form
(provided at the end of the manual) and include it with the
device According to C guidelines other local laws for hazardous
materials, the owner of the corresponding hazardous waste is
responsible for its disposal The owner must observe the
proper regulations for shipping purposes All devices returned
to ABB must be free of any hazardous materials (for example,
acids, alkalis and solvents)
Disposal
ABB actively promotes environmental awareness and has an
operational management system that meets the requirements
of DIN EN ISO 9001:2000, EN ISO 14001:2004 and OHSAS 18001
ABB products are intended to have minimal impact on the
environment and individuals during their manufacture, storage,
transport, use and disposal
This adherence to environmental standards includes the use of
natural resources In this endeavor, ABB maintains an open
dialog with the public through its publications
The product / solution is manufactured from materials that can
be reused by specialized recycling companies
Information on WEEE2 Directive (Waste Elec-
trical and Electronic Equipment)
This product/solution is not subject to the WEEE2 Directive or
corresponding national laws (e g , the ElektroG-Electrical and
Electronic Equipment Act-Germany) Dispose of the product/
solution at a specialized recycling facility Municipal garbage
collection points should not be used for this purpose
According to WEEE2 Directive, only products that are used in
private applications may be disposed of at municipal garbage
facilities Proper disposal prevents negative effects on both
individuals and the environment and also supports the reuse of
valuable raw materials ABB can accept and dispose of returns
for a fee
Safety information for electrical installation
WARNING
Electrical connections may only be established by
authorized personnel in accordance with the electrical
circuit diagrams The electrical connection information in
the manual must be observed; otherwise, the application
protection type may be affected Ground the measurement
system according to requirements
