INSTALLATION GUIDE
REV. D
5/5
4.
Mount anchor plate fitting on to the front edge
of the door profile.
Note!
Before tightening the screws, make
sure the surfaces of Magne electromagnet and
anchor plate are completely parallel, i.e. that full
contact is obtained when the door is closed.
5.
To see if Magne fitting needs to be adjusted,
mount a separate door stop and close the door.
Magne and anchor plate should only be in contact
with each other when the door is in closed
position.
Note!
To prevent damages on Magne, a
separate door stop must be used.
6.
To ensure that the function is working
correctly, open/close the door several times.
Adjust fittings if needed.
See complete product range and accessories on
