2TLC172072M0201, rev. F
8
www.abb.com/jokabsafety
2018-06-01
Anti-cheat-board
The anti-cheat-board (optional) can be connected individually or in series by one of the 3-position buttons (S1 or
S2).
Warning!
When the anti-cheat-board is connected
in series
with a 3-position push button, one of the following two options
are implemented to ensure the 3-position push button functions correctly:
1. Concurrent control of the two channels when enabling the two switches.
2. Monitored reset of the 3-position button connected in series with the anti-cheat-board.
Bottom parts
Electrical connections
– AB
Note: 12-pin Cannon connector, connected internally to fit the regular monitoring unit. Anti-cheat-board is an
option.
Electrical connections
– AC
Note: 5-pin M12 male connector. Designed exclusively for top part JSHD4-1. Internally connected for adapting to
safety relays in the RT series and Pluto safety PLC. Anti-cheat-board is not an option.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
A
B
C
D
E
F
G
H
J
K
L
M
Male pin in 2 x
8 Molex male
12-pin Cannon
male connector
Bottom part
– AB:
12-pin Cannon male connector
A ) S1
– Common*
B ) S1
– Enabled
C ) S2
– Common
D ) S2
– Enabled
E ) S1
– Disabled
F ) S3, S4
– Common
G ) S3
– Enabled
H ) S4
– Enabled
J ) +24 VDC (anti-cheat)
K ) 0 VDC (anti-cheat, LED 1, LED 2)
L ) Anti-cheat
– Common
M ) Anti-cheat
– Operator detected
* Note: The COM signal must be +24 VDC to allow the LEDs and anti-cheat-board
to function properly.
Bottom part
– AC:
5-pin M12 male connector
1 ) Brown:
S2
– Common
2 ) White:
S1
– Common
3 ) Blue:
S2
– Enabled
4 ) Black:
S1
– Enabled
5 ) Grey:
S1
– Disabled
Note:
Connections in compliance with factory-made units.
Proposed use following manual assembly. Cable
colours for each pin as per list.
1
2
3
4
5
5-pin M12 male
connector
5 x individual
wires
M12 5-pin male
connector seen
from the cable side
M12 5-pin male
connector seen
from the cable side
