ABB IRB-M100, Технические характеристики товара

Страница: 27 / 40

1.3.4 Payload
Payload
This chapter describes the interfaces or requirements that AGV has for the
carriage's design.
Interface for Payload on the AGV top plate
The AGV is designed to carry the payload on the top plate of the AGV.
Intend to secure the payload on the top plate, the six screws on the following
illustration need to be removed for the extra equipment. M5 bolt is used to fit with
the locking hole.
For M5 bolts
221.5 221.5
3
8
4
xx2100000204
Note
If the guide wheel has any interference with the extra equipment, remove it.
If any special design is needed for your equipment, please contact ABB.
Interface for Payload with pin unit
The pin unit is designed to hook the carriage.
Note
When design the carriage for the extra loads, the pin unit must be accessible
from the upper side.
Then the user can push the pin unit when the AGV need to be released from the
carriage manually.
Continues on next page
Product specification - IRB-M100 27
3HKA00000184276-001 Revision: A
© Copyright 2021 ABB. All rights reserved.
1 Description
1.3.4 Payload