ABB i-bus
®
KNX
Commissioning
AA/S 4.1.2, AA/A 2.1.2 | 2CDC505163D0201 47
Use forced operation 2
Options:
No
Forced operation objects, 1 bit; 0 active
Forced operation objects, 1 bit; 1 active
Forced operation objects, 2 bits
Linked group object:
Forced operation 2, 1 bit
Forced operation 2, 2 bits
Depending on the selected type of forced operation, activating forced operation enables the corresponding
parameters below for setting a forced operation.
Selection of option
Forced operation objects, 1 bit
:
Output value with forced operat. 2
in % of output range [0...100]
Options:
0
…100
This parameter specifies the output value when forced operation 2 is activated.
Selection of option
Forced operation objects, 2 bits
:
Output value with forced operat. 2 ON
in % of output range [0...100]
Options:
0
…100
This parameter specifies the output value when forced operation 2 ON is activated.
Output value with forced operat. 2 OFF
in % of output range [0...100]
Options:
0
…100
This parameter specifies the output value when forced operation 2 OFF is activated.
Note
The reaction and parameters of forced operation 2 are identical to those for forced operation 1.
However, forced operation 1 takes priority.
Содержание i-bus KNX AA/A 2.1.2
