DGN/S 1.16.1
DGN/S 1.16.1
ABB i-bus
®
KNX
DALI Gateway, Emergency Lighting, MDRC
DGN/S 1.16.1, 2CDG 110 142 R0011
Page 2 of 4
DGNS_1161_TD_EN_V1-0
2CDC 507 115 D0201
8
8
Operating and display elements
button
button/LED
LED , green
LED , yellow
DALI output test
for assignment of the physical address
display for operation readiness
for displaying DALI fault, constant light
for displaying test mode, slow flashing
for displaying initialisation or more than
64 DALI devices, quick flashing
Enclosure
IP 20
to EN 60529
Safety class
II
to EN 61140
Isolation category
overvoltage category
pollution degree
III to EN 60 664-1
2 to EN 60664-1
KNX safety extra low voltage
SELV 24 V DC
DALI voltage
typical 16 V DC (9.5…22.5 V DC)
no-load voltage
lowest supply current at 11.5 V
highest supply current
to EN 60929 and EN 62386
16 V DC
160 mA
230 mA
Temperature range
operation
storage
transport
-5 °C…+45 °C
-25 °C…+55 °C
-25 °C…+70 °C
Environmental conditions
humidity
maximum 93 %, moisture condensation
should be excluded
Design
modular installation device (MDRC)
dimensions
mounting width
mounting depth
modular installation device, Pro
M
90 x 72 x 64.5 mm (H x W x D)
4 modules at 18 mm
68 mm
Installation
on 35 mm mounting rail
to EN 60 715
Mounting position
as required
Weight
0.16 kg
Housing, colour
plastic housing, grey
Approvals
KNX to EN 50 090-1, -2
certification
CE mark
in accordance with the EMC guideline and
low voltage guideline
1)
The length relates to the common DALI control cable. The maximum values are rounded off and relate to the resistance values.
EMC influences are not considered. For this reason, the values should be considered as absolute maximum values.
2)
Both “normal” lamps as well as battery operated emergency lighting can be connected in a mixed configuration to the DGN/S 1.16.1.
However, the maximum number of DALI devices may not exceed 64.
