ABB HART Industrial IT enabled TZIDC, Руководство по эксплуатации

Страница: 28 / 69

28 Electro-pneumatic positioner TZIDC 41/18-79 EN
3.4.3 Parameter setting example
"Changing zero position (of the LCD) from clockwise to counter-clockwise"
Initial situation: the positioner is operating in mode 1.1.
1. Change over to the configuration level:
- Press and hold and at the same time.
- Additionally, briefly press
ENTER
.
- Wait until the countdown has run down from 3 to 0.
- Release and .
- is displayed.
2. Change over to parameter group 3._:
- Simultaneously press and hold
MODE
and
ENTER
.
- Additionally 2 x briefly press .
- is displayed.
- Release
MODE
and
ENTER
.
- is displayed.
3. Select parameter 3.2 "Zero position":
- Press and hold
MODE
.
- Additionally 2 x briefly press .
- is displayed.
- Release
MODE
.
4. Change parameter setting:
- Briefly press to select "CTCLOCKW".
IMPORTANT
An overview of the parameter settings that can be edited via the front
panel keypad is found in Appendix A.
conf
mA
%
C
°
conf
mA
%
C °
conf
mA
%
C °
conf
mA
%
C °