ABB HART HHT 275, Руководство пользователя, Страница: 6 / 15

"Serve/Watch" menu
6 "Serve/Watch" menu 42/18-75 EN
5 "Serve/Watch" menu
IIn this menu you can call up several parameters for display in order to monitor the pro-
cess. Some of them are shown directly in the menu line, others have to be called up by
entering the item No. Pressing (EXIT) will return you to the "Serve/Watch" menu.
1 Setpoint
Display the setpoint.
2 Position
Display the current position as a percentage of the stroke range.
3 Difference
Display the control deviation as a percentage of the stroke range.
4 Tolerance band
Display the tolerance band as a percentage of the stroke range.
5 Shut off value
Display the shut off value as a percentage of the stroke range.
6 Temperature
Display the temperature in °C.
7 Setpoint range
1 Lower current value
Display the low setpoint range limit.
2 Upper current value
Display the high setpoint range limit.
8 Operating mode
Display the currently active operating mode as a plain text message.
F4
The following parameters cannot be called up on the communicator:
- Travel counter
- Travel counter limit
- Stroke counter
- Stroke counter limit
- Hysteresis
Use the configuration program on the PC to display or edit these parameters.
The following parameters are not automatically polled/updated:
- Tolerance band
- Shut off value
- Setpoint range
- Alarmmask
Switch the communicator off and on again to display the latest parameter values.