Mounting/Installation
Operating Instructions VER:1.0
│
12
Pos: 42 /CNDEX/01 Heading/1. Heading/Heading_Mounting/Installation @ 56\mod_1487743369641_15.docx @ 749852 @ 1 @ 1
7
Mounting/Installation
Pos: 43 /CNDEX/00 Warning/Warning_Electric voltage_Dangerous currents @ 56\mod_1487741007782_15.docx @ 749637 @ @ 1
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 110-240 V supply system to be performed only by
specialist staff!
Pos: 44 /CNDEX/01 Heading/1.1 Heading/Heading_Requirement for electrician @ 56\mod_1487743099110_15.docx @ 749789 @ 2 @ 1
7.1
Requirement for the electrician
Pos: 45 /CNDEX/00 Warning/Warning_Electric voltage_Install the device @ 56\mod_1487743205578_15.docx @ 749810 @ @ 1
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
– Incorrect installation endangers your life and that of the user of the electrical
system.
– Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
– Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
– Use suitable personal protective clothing.
– Use only suitable tools and measuring devices.
– Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective grounding, necessary additional measures, etc.).
Pos: 46 /CNDEX/99 Auxiliary tools/++++++++++++++ page break +++++++++++++++ @ 57\mod_1487814735946_0.docx @ 750979 @ @ 1
