ABB GLA232 Series Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 67

ABB GLA232 Series Скачать руководство пользователя страница 29

ABB

LGR-ICOS

™ GLA232 Series Methane/Ethane Analyzer User Manual

ABB PROPRIETARY INFORMATION

29



At the end of each data file are encrypted listings of settings used by the analyzer for
that data file. Settings are typically stored for diagnostic or troubleshooting purposes.

Transfer Data Files

To transfer data files from the analyzer hard drive to a USB storage device:

1. Click the

Files

button on the

User Interface Control Bar

(Figure 8) to access the

File

Transfer

menu (Figure 15).

2. Insert a USB storage device into the USB port on the front panel of the analyzer.
3. Click the

Mount USB

button (Figure 15).

Figure 15: File Transfer Menu: Local Hard Drive (Left Pane) and USB Flash Drive (Right Pane)

4. Transfer data files from the analyzer hard drive to a USB storage device by dragging and

dropping the files from the hard-drive pane to the USB device pane. Use the left-mouse
button to highlight one or multiple files in the window. The directory windows default to
the local hard drive on the left screen and the USB memory device on the right.

When you have finished transferring files:

1. Click the

Unmount USB

button.

2. Wait for the

Safe to Remove USB Memory Device

message before removing the USB

memory device.

3. Click

Close

to exit the

File Transfer

menu.

«
...
27
28
29
30
31
...
»

Содержание GLA232 Series




































































Отзывы:

Нет отзывов