ABB FSE-31, Руководство пользователя

Страница: 26 / 38

26 Electrical installation

Installation procedure
1. Stop the drive and do the steps in section Electrical safety
precautions on page 8 before you start the work.
2. Connect the power supply cables to the X81 terminal.
3. Connect the safety encoder to the X31 terminal as follows:
Note : This diagram is applicable to all revisions of FSE-31.
However, VCC is 15 V DC for revision F and later, and 24 V
DC for the module revisions A to E. You can see the revision of
the module on the type designation label. Refer to
Type
designation label on page 18 .
4. Make sure that the electrical installation is completed. See
chapter Installation checklists in the FSO-21 safety functions
module user’s manual (3AXD50000015614 [English]).
WARNING! Use only the X31 connector of the FSE-31
module to supply power to the encoder. Do not use other
power supplies, because they can cause damage to the
module.
1
1
0
VCC 0V
2
FSE-31
B+
B-
Z+
Z-
SHLD
2
0
3
4
5
6
7
8
A-
A+
9
X31
Encoder 1
COM_ENC
VCC_ENC
2
1