manualshive.com logo in svg

ABB Focus II FII-4-14 Series, Оригинальное руководство пользователя

Поделиться
Скачать
ABB Focus II FII-4-14 Series Скачать руководство пользователя страница 2

2

2TLC172015M0201, rev. D

www.abb.com/lowvoltage

Read and understand this document

Please read and understand this document before using the products. Please consult your ABB AB JOKAB SAFETY
representative if you have any questions or comments. 

WARRANTY 

ABB AB JOKAB SAFETY’s exclusive warranty is that the products are free from defects in materials and workman-

ship for a period of one year (or other period if specified) from date of sale by ABB AB JOKAB SAFETY.

ABB AB JOKAB SAFETY MAKES NO WARRANTY OR REPRESENTATION, EXPRESSED OR IMPLIED, RE-
GARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE 
PRODUCTS, ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMI-
NED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OR THEIR INTENDED USE. ABB AB 
JOKAB SAFETY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. 

LIMITATIONS OF LIABILITY 

ABB AB JOKAB SAFETY SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DA-
MAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of ABB AB JOKAB SAFETY for any act exceed the individual price of the product on
which liability asserted.
IN NO EVENT SHALL ABB AB JOKAB SAFETY BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER 
CLAIMS REGARDING THE PRODUCTS UNLESS ABB AB JOKAB SAFETY’S ANALYSIS CONFIRMS THAT THE 
PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO
ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. 

SUITABILITY FOR USE 

ABB AB JOKAB SAFETY shall not be responsible for conformity with any standards, codes, or regulations that apply 
to the combination of products in the customer’s application or use of the product.

At the customer’s request, ABB AB JOKAB SAFETY will provide applicable third party certification documents identi

-

fying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete

 

determination of the suitability of the products in combination with the end product, machine, system, 
or other application or use.
The following are some examples of applications for which particular attention must be given. This is
not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses 
listed may be suitable for the products:

 

–

Outdoor use, uses involving potential chemical contamination or electrical interference, or conditionsor uses not 
described in this document.

 

–

Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, 
amusement machines, vehicles, and installations subject to separate industry or government regulations.

 

–

Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY 
WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND 
THAT THE ABB AB JOKAB SAFETY PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED 
USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 

PERFORMANCE DATA 

While every effort has been taken to ensure the accuracy of the information contained in this manual, 
ABB AB JOKAB SAFETY cannot accept responsibility for errors or omissions and reserves the right to make  
changes and improvements without notice. Performance data given in this document is provided as a guide for the 
user in determining suitability and does not constitute a warranty. It may represent the result of ABB AB JOKAB 
SAFETY’s test conditions, and the users must correlate it to actual application requirements. Actual performance is 
subject to the ABB AB JOKAB SAFETY Warranty and Limitations of Liability.

Содержание Focus II FII-4-14 Series





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды