ABB Feather Duster, Руководство по эксплуатации продукта

Страница: 82 / 150

6 Reference information
6.4. Standard toolkit
3HAW050027150 Revision: C 80
©
Co
py
rig
h
t 201
3-
101
6 ABB. All righ
ts reser
v
ed.
6.4. Standard toolkit
General
All service (repairs, maintenance and installation) procedures contain lists of tools required
to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools that are
considered standard are gathered in the standard toolkit and defined in the table below.
This way, the tools required are the sum of the standard toolkit and any tools listed in the
instruction.
Contents, standard toolkit
Qty Tool
1 Set of spanners or ring-open-end spanner 8-22 mm
1 Hex keys (Allen key) 3, 4, 5, and 6 mm
1 Torque wrench
1 Ratchet head for torque wrench 1/4”
1 Socket head cap 3mm, 4mm, 5mm, 6mm, 8mm and 10mm socket 1/4” bit L 20 MM
(for socket head cap screws - ISO 4762)
1 Mild thread-locker (Recommended: Loctite 243)
1 Small flat tip screwdriver
1 Small cross tip screwdriver
1 Plastic mallet
1 Ladder 2.5m
1 Ruler
1 Brush