Endura AZ20 series probe
Combustion oxygen monitor
1 Safety
4
IM/AZ20P–EN Rev. G
1.6 Restriction of Hazardous Substances (RoHS)
1.7 Safety Precautions
Please read the entire manual before unpacking, setting up, or
operating this instrument.
Pay particular attention to all warning and caution statements.
Failure to do so could result in serious injury to the operator or
damage to the equipment.
To ensure the protection provided by this equipment is not
impaired, do not use or install this equipment in any manner
other than that which is specified in this manual.
1.8 Safety Conventions
1.9 Safety Recommendations
For safe operation, it is imperative that these service instructions
be read before use and that the safety recommendations
mentioned herein be scrupulously respected. If danger warnings
are not heeded to, serious material or bodily injury could occur.
1.10 Service and Repairs
Other than the serviceable items listed in Appendix D, page 36,
none of the instrument's components can be serviced by the
user. Only personnel from ABB or its approved representative(s)
is (are) authorized to attempt repairs to the system and only
components formally approved by the manufacturer should be
used. Any attempt at repairing the instrument in contravention of
these principles could cause damage to the instrument and
corporal injury to the person carrying out the repair. It renders
the warranty null and void and could compromise the correct
working of the instrument and the electrical integrity or the CE
compliance of the instrument.
If you have any problems with installation, starting, or using the
instrument please contact the company that sold it to you. If this
is not possible, or if the results of this approach are not
satisfactory, please contact the manufacturer's Customer
Service
1.11 Potential Safety Hazards
The following potential safety hazards are associated with
operating the system:
Electrical (line voltage)
Probe weight
The European Union RoHS Directive and
subsequent regulations introduced in member
states and other countries limits the use of six
hazardous substances used in the
manufacturing of electrical and electronic
equipment. Currently, monitoring and control
instruments do not fall within the scope of the
RoHS Directive, however ABB has taken the
decision to adopt the recommendations in the
Directive as the target for all future product
design and component purchasing. .
Warning.
In this manual, a warning is used to indicate a
condition which, if not met, could cause serious personal
injury and / or death. Do not move beyond a warning until all
conditions have been met.
If a warning sign appears on the instrument itself, refer to
Precautionary Labels – UL Certification and Electrical Safety
– CEI / IEC 61010-1:2001-2 for an explanation.
Caution.
A caution is used to indicate a condition which, if
not met, could cause minor or moderate personal injury and
/ or damage to the equipment. Do not move beyond a
caution until all conditions have been met.
Note.
A note is used to indicate important information or
instructions that should be considered before operating the
equipment.
RoHS
Warning.
The installation of the instrument should be
performed exclusively by personnel specialized and
authorized to work on electrical installations, in accordance
with relevant local regulations.
Содержание Endura AZ20 series
Страница 39: ...Sales Software Service...
