ABB D1M 20, Руководство пользователя

Страница: 25 / 68

25
D1M 20 POWER METER USER MANUAL
7. Configuration (CONF)
When the user goes to the CONF section, Icon will be displayed.
When entering the
CONF
section, in order to change any configuration of the device, it is mandatory to
enter the password. It is needed to enter the password again when customer needs to re-operate after
inactivity time.
In case of wrong entering of the password for three times in a row, user will have to wait for 5 minutes
until he can enter the password once again.
In order to read only the configurations, it is possible to simultaneously press “ DOWN ” and “ Up ” buttons
while entering password.
After the user enters the password to unlock the device, icon will disappear.
CONF
includes the following menus:
Menu Description
UNIT Settings related to the device itself
ISTL Settings related to the installation conditions
I/O Settings related to the pulse LED
ALARM Definition of alarm conditions
TARF Tariff Setting
COMM
Settings related to the embedded communication protocols of the D1M
version
OTHR Other settings
7.1.Unit (UNIT)
UNIT
includes the following sub-menus:
Menu Description
PWD(Password) Change the existing password
RST(Reset) Full or partial reset of the meter
INFO(Information) Device information
RTC(Real time) RTC and DST setting
BRT(Brightness) Adjust the brightness of the display
ENSV(EnergySaving) Inactivity time interval
ALOG(AuditLog) Review audit logs
HOME PAGE Home page and autoscroll setting
LED LED parameter setting
Modify password (PWD)
PWD shares the same interface and setting way with password setting. For details, see “6.1.Password for
the first use (PWD)” .
CONF>UNIT>PWD