Operation
18
ABB, 1SBC159103M0201
7.2 System Menu
Set the dip switch
SW7 = ON
. After the self-test, the system menu of the oper-
ator terminal is displayed on the screen:
The functions of the commands are briefly explained below:
System menu
command
Function
Link
The operator terminal is connected.
F2 - Confg
Sets up the internal time clock and communication parameters
in the operator terminal. All the settings has to be made for
the operator terminal to work properly.
Use , ,
and
to move to desired field; + and - to set
the value of the field.
F3 - Copy
Copies application data to another CP430.
F4 - Set
Adjusts touch panel LCD contrast and clears data RAM.
See also section
F5 - Run
Runs the application.
MA00824B_MAEN859.book Page 18 Tuesday, June 5, 2007 10:34 AM
