manualshive.com logo in svg

ABB CONCEPTPOWER CLASSIC DPA-50, Руководство пользователя

Поделиться
Скачать
ABB CONCEPTPOWER CLASSIC DPA-50 Скачать руководство пользователя страница 65

 
 
 
 
 
 

Section-5

 

 

 

04-3008_S5_ABB_OPMCPDPA-S2_GB_121202

 

Page 5/16   ABB 

Printed in Switzerland – Modifications reserved

 

5.1.2 Shutdown 

Procedure 

 

WARNING

!

 

THE OPERATIONS DESCRIBED IN THIS CHAPTER MUST BE 
PERFORMED BY A SERVICE ENGINEER FROM THE MANUFACTURER OR 
FROM A AGENT AUTHORIZED BY THE MANUFACTURER. 

 

The 

CONCEPTPOWER DPA

TM

 may be shutdown completely, if the load does not need input power for an 

extended period of time. 
It may be switched to Maintenance Bypass Mode for service or maintenance purposes, or transferred to the 
OFF-LINE Mode (ECO-Mode), if the load does not need the highest degree of protection. 
The load may be disconnected by means of the two ON/OFF (LOAD-OFF) buttons for security reasons. 

Complete Shutdown procedure of CONCEPTPOWER DPA

TM 

S2: 

Only in case there is no need to supply the load, the UPS System can be completely shutdown. The following 
procedures can only be executed after the load has completely been de-energized. 

NOTE!

 

IN THE CASE THAT THE PARALLEL UPS SYSTEM HAS TO BE TURNED 
OFF, THEN BOTH ON/OFF BUTTONS ON ALL UPS   MODULES HAVE TO 
BE PUSHED. IN THIS CASE THE POWER SUPPLY TO THE LOAD WILL BE 
INTERRUPTED. 

 

1. 

Verify that the loads are shutdown and that there is no need for power supply to the load. 

2. 

If the loads are all disconnected, press simultaneously both ON/OFF-Buttons on UPS-Control Panel 
on all  three Control Panels. 
On the LCD: “LOAD OFF, SUPPLY FAILURE” will appear and the LED-indicator will indicate as 
shown below: 

LED Indicator 

Colour 

LINE 1 

Green 

LINE 2 

OFF 

BYPASS OFF 

INVERTER OFF 

BATTERY Green 

3. 

Open all Parallel Isolator Switches IA2-1, IA2-2, IA2-3, IA2-4, IA2-5 (depending of the UPS frames). 

4. 

Open battery fuses/breakers on internal (if any) and external battery cabinets or racks. 

5. 

Open the mains fuses/breaker in the building distribution panel. 

NOTE!

 

MAKE SURE THE INTERNAL DC-CAPACITORS (ELCO) HAVE BEEN 
DISCHARGED WAITING AT LEAST 5 MINUTES. 

 

THE CONCEPTPOWER DPA

TM

 S2 IS NOW VOLTAGE FREE. 

!

!

Содержание CONCEPTPOWER CLASSIC DPA-50


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды