ABB ABILITY™ SMART SENSOR BLUETOOTH® GATEWAY
DOCUMENT ID
REV.
DATE
LANG.
PAGE
9AKK107046A4620
L
August 2022
EN
26/29
© Copyright 2021 ABB. All rights reserved.
Gateway is not reading the Smart Sensor data:
-
Check that the Smart Sensors are within the gateway’s range.
-
The gateway is reading the data from Smart Sensors periodically. It can take
couple of hours to see the first measurements in Smart Sensor portal.
-
Check from the
Status
Page if it shows the Online Time. If not, please check the
Internet connection.
-
If the Online Time is shown, check in the
Container
page that under
Installed APPs
section (in fw 1.4.3 the section is called
List of installed apps
) there is an APP
called
GwAppProd
. If not, contact the Smart Sensor Support (email address at the
end of the manual) requesting the gateway application to be installed.
Testing the internet speed (fw 2.1.0):
The
SpeedTest
tool can be used to measure the throughput of the internet
connection.
This tool can be found in the local configuration page, under the
Other
tab in the
Debug Tools
section of the page.
The fields must be completed as shown below, then click
Start
.
It will take ~10 seconds for the result to be shown.
Figure 21
SpeedTest
tool
