Operating Instructions
Busch-Wächter
®
Operation
Operating Instructions | 1473-1-8136
— 16 —
8.2.3 Group
mode
Fig. 13: Group mode
If persons move in the detection area, switching signals will be transmitted. The brightness limit value can freely
selected. The switch-off delay has to be set via the actuator (receiver).
In this operating mode, several watchdogs and actuators can communicate with each other.
8.2.4 Single
mode
Fig. 14: Single mode
If persons move in the detection area, switching signals will be transmitted. The brightness limit value can freely
selected. The switch-off delay is fixed to 3 minutes. The switch-off delay of the receiver, e.g. 6701, must be set to
a value > 3 minutes.
In this operating mode, only one watchdog can send signals to a specific actuator.
8.2.5 Programming
Fig. 15: Programming
Note
The individual programming steps are contained in chapter 8.4 "Programming devices" on page 17.
8.3 Brightness-dependent
switching
Icon Function
Switching during all brightness levels
Switching during advancing twilight
Switching during darkness
T
B
GS
ES
P
T
B
GS
ES
P
T
B
GS
ES
P
