Manual for High Voltage Process Performance Motors
- 1
3BFP 000 063 R0101 REV D
Chapter 1 - Introduction
1.1
General information .................................................................................................... 1
1.2
Important note............................................................................................................. 1
1.3
Limitation of liability.................................................................................................. 2
1.4
Documentation............................................................................................................ 2
1.4.1
Documentation of the machine .................................................................. 2
1.4.2
Information not included in documentation............................................... 3
1.4.3
Units used in this User’s Manual............................................................... 3
1.5
Identification of the machine ...................................................................................... 3
1.5.1
Serial number of the machine .................................................................... 3
1.5.2
Rating plate ................................................................................................ 3
Chapter 2 - Transport and Unpacking
2.1
Protective measures prior to transport ........................................................................ 6
2.1.1
General....................................................................................................... 6
2.1.2
Bearing plate .............................................................................................. 7
2.2
Lifting the machine ..................................................................................................... 7
2.2.1
Lifting a machine in a seaworthy package................................................. 8
2.2.2
Lifting a machine on a pallet ..................................................................... 9
2.2.3
Lifting an unpacked machine..................................................................... 9
2.3
Turning a vertically mounted machine ..................................................................... 10
2.4
Checks upon arrival and unpacking.......................................................................... 11
2.4.1
Check upon arrival................................................................................... 11
2.4.2
Check upon unpacking............................................................................. 11
2.5
Storage ...................................................................................................................... 11
2.5.1
Short term storage (less than 2 months)................................................... 11
2.5.2
Long term storage (more than 2 months)................................................. 12
2.5.3
Rolling bearings....................................................................................... 13
2.5.4
Openings .................................................................................................. 14
2.6
Inspections, records .................................................................................................. 14
Chapter 3 - Installation and Alignment
3.1
General...................................................................................................................... 15
3.2
Foundation design..................................................................................................... 15
3.2.1
General..................................................................................................... 15
3.2.2
Forces to the foundation .......................................................................... 16
3.2.3
Flanges for vertically mounted machines ................................................ 16
3.3
Machine preparations before installation.................................................................. 16
3.3.1
Insulation resistance measurements......................................................... 16
3.3.2
Disassembly of the transport locking device ........................................... 16
3.3.3
Coupling type........................................................................................... 17
3.3.4
Assembly of the coupling half ................................................................. 17
3.3.4.1
Balancing of coupling ....................................................... 17
3.3.4.2
Assembly........................................................................... 17
3.3.5
Belt drive.................................................................................................. 18
3.3.6
Drain plugs............................................................................................... 18
3.4
Installation on concrete foundation........................................................................... 18
3.4.1
Scope of delivery ..................................................................................... 18
3.4.2
General preparations ................................................................................ 18
