ABB ACS880 Series, Инструкция по механической установке

Страница: 16 / 24

„
￭ Fastening the cabinet (non-marine units)
Alternative 1 – Clamping
1. Insert the clamps (included) into the twin slots along the front and rear edges of the
cabinet frame body and fasten them to the floor with a bolt. The recommended maximum
distance between the clamps in the front edge is 800 mm (31.5”).
2. If floor mounting at the back is not possible, fasten the top of the cabinet to the wall with
L-brackets (not included in the delivery) bolted to the lifting eye/bar holes, and suitable
hardware.
Fastening top to wall Clamping bottom to floor
„
„
„
M16
„
„
„
„ „ „
16 Mechanical installation
4