ABB ACS850 series, Руководство пользователя

Страница: 29 / 48

Operation
29
Changed Parameters
In the Changed Parameters mode, you can:
• view a list of all parameters that have been changed from the macro default
values
• change these parameters
• start, stop, change the direction and switch between local and remote control.
How to view and edit changed parameters
Step Action Display
1. Go to the Main menu by pressing if you are in the Output mode, otherwise
by pressing repeatedly until you get to the Main menu.
2. Go to the Changed Parameters mode by selecting CHANGED PAR on the
menu with keys
and , and pressing .
• If there are no changed parameters in the history, corresponding text will be
shown.
• If parameters have been changed, a list of them is shown. Select the changed
parameter on the list with keys
and . The value of the selected
parameter is shown below it.
3. Press to modify the value.
4. Specify a new value for the parameter with keys and .
Pressing the key once increments or decrements the value. Holding the key
down changes the value faster. Pressing the keys simultaneously replaces the
displayed value with the default value.
5. • To accept the new value, press . If the new value is the default value, the
parameter is removed from the list of changed parameters.
• To cancel the new value and keep the original, press .
MENU
EXIT
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT ENTER 00:00
MAIN MENU 1 LOC
ENTER
00:00
No parameters
MESSAGE LOC
9906 Mot nom current
3.5 A
9907 Mot nom voltage
9908 Mot nom freq
9909 Mot nom speed
CHANGED PAR
EXIT EDIT 00:00
LOC
EDIT
9906 Mot nom current
PAR EDIT
3.5
A
CANCEL SAVE 00:00
LOC
9906 Mot nom current
PAR EDIT
3.0
A
CANCEL SAVE 00:00
LOC
SAVE
CANCEL
9906 Mot nom current
3.0 A
9907 Mot nom voltage
9908 Mot nom freq
9909 Mot nom speed
CHANGED PAR
EXIT EDIT 00:00
LOC