ABB ACS800-17LC, Руководство по оборудованию

Страница: 163 / 182

Technical data
157
Units with the Common Motor Terminal (CMT) cubicle (H359)
Terminal and lead-through data for the resistor cable
See ACS800-607LC 3-phase Brake Units Hardware Manual (3AFE68835861
[English]) or ACW 621 Braking Chopper Sections User’s Manual (3BFE64314874
[English]).
Terminal and lead-through data for the control cables
See section Default I/O connection diagram on page 103 . Each incoming and
inverter module cubicle is equipped with one EMI conductive cushions lead-through.
Inverter unit
No. of
busbars
Screw size Tightening torque Cable lead-throughs
Modules ACS800-17LC type
R7i, R8i, 2×R8i All 3 M12 (½”) 70 N·m (52 lbf·ft) 9 × Ø60 mm (2.36“) or 12
× Ø60 mm (in 400 mm
wide cubicles)
3×R8i All 3 M12 (½”) 70 N·m (52 lbf·ft)
4×R8i, 5×R8i 690 V 3 M12 (½”) 70 N·m (52 lbf·ft) 12 × Ø60 mm
4×R8i 400 and 500 V 2×3 M12 (½”) 70 N·m (52 lbf·ft) 18 × Ø60 mm
5×R8i, 6×R8i 400 and 500 V 2×3 M12 (½”) 70 N·m (52 lbf·ft) 2 × (12 × Ø60 mm)
6×R8i, 7×R8i 690 V 2×3 M12 (½”) 70 N·m (52 lbf·ft) 18 × Ø60 mm
8×R8i, 9×R8i 690 V 2×3 M12 (½”) 70 N·m (52 lbf·ft) 2 × (12 × Ø60 mm)
10×R8i 690 V 3+(2×3) M12 (½”) 70 N·m (52 lbf·ft)
12 × Ø60 mm +
18 × Ø60 mm
Dimensions of output busbar in 300 mm
CMT cubicle
Dimensions of output busbar in
400 mm CMT cubicle
Dimensions of output busbar in
600 mm CMT cubicle