ABB ACS580 Series, Руководство по оборудованию

Страница: 291 / 468

it operates rapidly enough. The operating time depends on the supply network
impedance and the cross-sectional area and length of the supply cable.
Note 1: See also Implementing short-circuit and thermal overload
protection (page 117) .
Note 2: Fuses with higher current rating than the recommended ones must not
be used.
Note 3: Fuses from other manufacturers can be used if they meet the ratings and
the melting curve of the fuse does not exceed the melting curve of the fuse
mentioned in the table.
￭
gG fuses
Check on the fuse time-current curve to ensure the operating time of the fuse is
below 0.5 seconds. Obey the local regulations.
gG (IEC 60269) Input
current
Min.
short-
circuit
current
1)
ACS580-
01-…
IEC
60269
size
ABB type Voltage
rating
I2t Nominal
current
V A2s A A A
3-phase Un = 230 V
000 OFAF000H25 500 2500 25 4.7 200 04A7-2
000 OFAF000H25 500 2500 25 6.7 200 06A7-2
000 OFAF000H25 500 2500 25 7.6 200 07A6-2
000 OFAF000H25 500 2500 25 12.0 200 012A-2
000 OFAF000H25 500 2500 25 16.9 200 018A-2
000 OFAF000H40 500 7700 40 24.5 320 025A-2
000 OFAF000H40 500 7700 40 31.2 320 032A-2
000 OFAF000H63 500 20100 63 46.7 500 047A-2
000 OFAF000H63 500 20100 63 60 500 060A-2
00 OFAF00H125 500 103000 125 89 1300 089A-2
00 OFAF00H125 500 103000 125 91 1300 091A-2
00 OFAF00H125 500 103000 125 115 1300 115A-2
0 OFAF0H200 500 300000 200 144 1700 144A-2
0 OFAF0H250 500 600000 250 171 2300 171A-2
1 OFAF1H315 500 710000 315 213 3300 213A-2
- - - - - 273 - 248A-2
Technical data 291