8
Installation Supplement for ACS550-U2 Drives
Installation
•
The following diagram shows the power and control connection points in the
enclosure module supplied with the R8 drive module.
•
Re-mount the high voltage shield.
Warning! Always replace all high voltage shields before applying power.
•
See the ACS550-02/U2 User’s Manual for detailed instructions on control
connections, installation check list and drive start-up process.
Switch Fuse
Input (U1,V1,W1)
Output (U2,V2,W2)
PE Connection
OMIO Board
(Control Wiring Terminals
and Option Module Mounts)
R8 Frame Size
Gland/Conduit Plate
(Cable fittings shown
are typical examples)
