ABB ACQ580-04, Быстрое руководство по установке

Страница: 7 / 66

EN – Quick installation guide 7
EN
DA
DE
ES
FI
FR
FR
IT
FR
PL
PT
RU
SV
TR
ZH
Install the air baffles
See figure
W
on page
64
and
Generic cabinet planning instructions
in the hardware
manual.
Connect the control cables
3 B051:
• Carefully step drill sufficiently big holes to the cable entry clear plastic shroud for the
cables to be connected.
• Align the holes in the vertical direction according to the alignment holes in the shroud.
Smooth the hole edges.
• Remove the plastic sheeting from both sides of the shroud.
• Attach the cables firmly to the enclosure frame to prevent chafing against the hole
edges.
R 63
4 B051: Put the conductors of the input cables through the drilled holes in the clear
plastic shroud.
S 63
5 Connect the input power cable conductors to the L1/U1, L2/V1 and L3/W1 connection
busbars.
T 63
6 B051: Move the clear plastic shroud along the input cables to its final position.
Install the front clear plastic shroud.
U 64
7 Install the upper front cover. U 64
8 Remove the cardboard protective covering from the drive module air outlet. U 64
9 B051: Cut a hole in the side clear plastic shroud for the cable entry clear plastic
shroud. Install the side and top shrouds to the drive module.
V 64
Step Task Figure Page
1 Ground the outer shields of all external control cables 360 degrees at the enclosure entry. X 64
2 Ground the pair-cable shields of external control cables to a grounding clamp below the
control unit. Leave the other end of the shields unconnected or ground them indirectly via
a high-frequency capacitor with a few nanofarads, eg, 3.3 nF / 630 V.
X 64
3 Connect the conductors to the appropriate terminals of the control unit. See page 8 . X 64
4 Wire the option modules if included in the delivery - -
Step Task (input cables) Figure Page