ABB AC-AP Series Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 74

background image

46 Functions in the main Menu

I/O

In the

I/O

menu, each row provides terminal name,

number, electrical status and logical meaning of
the drive. Each row also provides a sub-menu that
provides further information on the menu item and
allow you to make changes to the I/O connections.

Diagnostics

The

Diagnostics

menu provides diagnostic

information, such as faults and warnings and helps
you to resolve potential problems. Use the menu
to make sure that the drive setup is functioning
correctly.

Note

: The contents displayed may vary based on

the drive/device to which the panel is connected,
and the menu shown is only an example.

PID

Set up the settings and actual values for the process PID controller. PID
is only used in remote control.

Fieldbus

To make the protocol configurations easier.

Advanced options/
functions

Contains settings for advanced functions, such as triggering or resetting
faults through I/O, or switching between entire set of settings.

Clock, region,
display

Contains settings for language, date and time, display (such as
brightness) and settings for changing how information is displayed on
screen.

Reset to defaults

Enables you to reset the Home view to its original factory state.

Sub-menu

Function

Start, stop,
reference, summary

Shows where the drive is currently taking its start, stop commands and
reference. The view is updated in real time. If the drive is not starting or
stopping as expected, or runs at undesired speed, use this view to find
out where the control comes from.

Limit status

Describes any limits currently affecting operation. If the drive is running
at undesired speed, use this view to find out if any limitations are active.

Active faults

Shows the currently active faults and provides instructions on how to fix
and reset.

Active warnings

Shows the currently active warnings and provides instructions on how to
fix and reset.

Active inhibits

Shows the currently active inhibits. The drive cannot start. Drive is not
parameterized correctly.

Fault & event log

Lists the faults, warnings and other events that have occurred in the
drive.

Sub-menu

Function

«
...
44
45
46
47
48
...
»

Содержание AC-AP Series











































































Отзывы:

Нет отзывов

Похожие инструкции для AC-AP Series

Бренд: UE Страницы: 4

Бренд: Jafar Страницы: 10

Бренд: Fagor Страницы: 10

Бренд: Fagor Страницы: 358

Бренд: Fagor Страницы: 556

Бренд: Fagor Страницы: 172

Бренд: Fagor Страницы: 180

Бренд: Fagor Страницы: 112

Master Control Unit

Бренд: FaderMate Страницы: 36

Бренд: FATEK Страницы: 10

Бренд: Haldex Страницы: 8

ecomat 100 R 360

Бренд: IFM Electronic Страницы: 16

Ecomot300 AC2630

Бренд: IFM Electronic Страницы: 11

Бренд: IFM Electronic Страницы: 23

Бренд: OES Страницы: 3

Бренд: Valcom Страницы: 6

Бренд: M-system Страницы: 13

1020 CAN-RS232-RS422 MFL

Бренд: PENKO Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды