ABB ABILITY™ SMART SENSOR BLUETOOTH® GATEWAY
DOCUMENT ID
REV.
DATE
LANG.
PAGE
4MWA000032
B
February 2023
EN
13/29
© Copyright 2023 ABB. All rights reserved.
2.5
LAN/Ethernet cable connection
If a LAN/Ethernet network is available, the gateway can be configured to use it. An
additional
PoE injector
is needed for power supply. Make sure to connect the gateway
using an ethernet cable to the port labelled as “
PoE
”, on the injector.
Or alternatively, a
12V – 2A adapter
2.1 Prerequisites for installation
on page
5
).
Figure 8 12V adapter with LAN network configuration
From the Gateway Basic page select:
-
Connection Priority:
Wired
-
IP Allocation:
DHCP
or
Static
(in case the IP address is given)
Press
Apply
at the bottom of the screen.
Figure 7 PoE Injector with LAN network configuration
